The Occupational Safety and Health Administration (OSHA) established the 29 CFR 1910.1030 Bloodborne Pathogen Standard to protect workers from the health hazards associated with exposure to blood and other potentially infectious materials (OPIM). This standard is particularly relevant in industries where employees may come into

1910.261 Pulp, paper, and paperboard mills (h) Bleaching (3) Liquid chlorine. (ii) Gas masks capable of absorbing chlorine shall be supplied, conveniently placed, and regularly inspected, and workers who may be exposed to chlorine gas shall be instructed in their use. 1910.264 Laundry machinery and

1910.332 Training (a) Scope. The training requirements contained in this section apply to employees who face a risk of electric shock that is not reduced to a safe level by the electrical installation requirements of 1910.303 through 1910.308. Note: Employees in occupations listed in Table

1910.410 Qualifications of dive team (a) Scope (1) Each dive team member shall have the experience or training necessary to perform assigned tasks in a safe and healthful manner. (2) Each dive team member shall have experience or training in the following: (i) The use

1910.1001 Asbestos (j) Communication of hazards to employees (7) Employee information and training. (i) The employer shall train each employee who is exposed to airborne concentrations of asbestos at or above the PEL and/or excursion limit in accordance with the requirements of this section. The

1910.151 Medical services and first aid (a) The employer shall ensure the ready availability of personnel for advice and consultation on matters of plant health. (b) In the absence of an infirmary, clinic, or hospital in near proximity to the workplace which is used for

1910.155 Fire protection. (c) Definitions (41)“Training” means the process of making proficient through instruction and hands-on practice in the operation of equipment, including respiratory protection equipment, that is expected to be used and in the performance of assigned duties. 1910.156 Fire brigades (b) Organization (1)

1910.177 Servicing of multi-piece and single-piece rim wheels (c) Employee training (1) The employer shall provide a training program to train all employees who service rim wheels in the hazards involved in servicing those rim wheels and the safety procedures to be followed. (i) The

1910.252 General requirements (a) Fire prevention and protection (2) Special precautions. When the nature of the work to be performed falls within the scope of paragraph (a)(1)(ii) of this section certain additional precautions may be necessary: (xiii) Management. Management shall recognize its responsibility for the

1910.217 Mechanical power presses (e) Inspection, maintenance, and modification of presses (2) Modification. It shall be the responsibility of any person modifying a power press to furnish instructions with the modification to establish new or changed guidelines for use and care of the power press

1910.142 Temporary labor camps (k) First aid (1) Adequate first-aid facilities approved by a health authority shall be maintained and made available in every labor camp for the emergency treatment of injured persons. (2) Such facilities shall be in charge of a person trained to

1910.132 General requirements (f) Training (1) The employer shall provide training to each employee who is required by this section to use PPE. Each such employee shall be trained to know at least the following: (i) When PPE is necessary; (ii) What PPE is necessary;